Why make your own cordage?
Made from natural materials, it is indispensable for building shelters, making bowstrings, fishing line, snares for catching game, and even “threads” for repairing clothing. This skill will definitely not go amiss..
Choosing the right material
Almost any woven material can be turned into quality cord. Several such cords braided together make a strong rope. Before you begin, evaluate your potential material by four criteria:
• Length. Fibers shorten when twisted, so the source material must have some extra length.
• Strength. The finished cord will become stronger, but the original fibers must also be reliable. Test this by giving the fiber a sharp tug in different directions. If it holds, tie a tight overhand knot in it. Didn’t break? Then the material is strong.
• Flexibility. You will be actively twisting the material, so it must bend well.
• Grip. The fibers must grip one another. Materials that are too smooth and slippery are unsuitable.
Where to find raw materials
There are many suitable materials in nature: tall grass, nettles (take the stem at the base, squeeze it, and run your hand upward — the leaves will fall away without stinging), seaweed, shrub fibers, and animal hair left after shedding.
The ideal raw material is bast — the inner layer of bark from dead standing trees (willow, linden). Cut the bark and peel off the bast in a long strip, then divide it into the lengths you need.
Important nuance: working with fibers
Remember that natural fibers shrink as they dry, which makes knots stronger. However, dry material can become brittle. To avoid this, soak it in water — it will shrink less. This process, called soaking (retting), also makes it easier to separate the fibers from the bark of young trees (linden, willow, chestnut). After drying, this raw material becomes soft, flexible, and ready for braiding.
Making twisted rope: step-by-step instructions
This is a simple but effective method that lets you make cordage for various needs.
• Twisting. Take a long fiber and twist it in one direction until it begins to coil into loops by itself.
• Folding. Fold the fiber about one third of its length from the end (do not fold it in half — that reduces strength).
• Twisting the doubled fiber. Pinch the fold with the fingers of one hand. Place the fibers on your knee and roll them away from you with your free hand. Your goal is not to tangle them but to twist them even more tightly.
• Securing and adding material. Press the finished section against your knee with your palm so it does not unwind, and release the other end — it will unwind slightly. Pinch the point where unwinding stops and repeat the process.
• Extending. When 4–5 cm remain at the short end, place a new fiber underneath and continue twisting — it will automatically be woven in. Secure the finished rope with a knot at the end so it does not unravel. If the cordage comes out too thick, tie off the end with a separate thin cord.
To strengthen the rope, fold it in half and repeat the procedure, but twist in the opposite direction.
Ten essential survival knots
Without knot-tying skills, even the best rope is useless. Here are ten basic knots worth mastering:
- Bowline: Creates a non-slip loop at the end of a rope. Indispensable in hundreds of situations. Easy to remember with the saying: “the rabbit comes out of the hole, goes around the tree, and goes back down the hole.” For maximum security, add a stopper knot on the free end.
- Coil knot (Gorden): A simple and convenient way to store rope neatly so it does not tangle.
- Clove hitch: Designed for securely attaching a rope to a horizontal support (a pole, stick).
- Constrictor knot: Ideal for quickly and securely tightening the neck of a sack or backpack.
- Figure-eight knot: A reliable and easy-to-untie knot. Widely used by climbers and sailors. Often used as a stopper knot or for attaching a rope to a pole.
- Tensioning (locking) knot: Excellent for joining two sticks in construction work. It is a simplified version of the sledge knot. After tightening, tie a couple of overhand knots at the end to secure it.
- Sledge knot: A very reliable knot for final securing. It is almost impossible to untie, so the rope will have to be cut.
- Reef knot: The classic knot for joining two ropes of equal thickness. Easy to untie. To increase reliability, tie overhand knots on the free ends.
- Sheet bend: Used for joining ropes of different diameters.
- Noose: An excellent temporary knot for towing a load (for example, a bundle of firewood) or for general attachment. It tightens strongly under load and unties easily when the load is released.
Main tip — practice!
You can learn knots and rope making at home using any materials at hand. Start with ordinary shoelaces or thin ropes. You will quickly be surprised at how flimsy fibers turn into strong and reliable cordage. This skill may one day save your life.
Next guide: Как обустроить комфортную стоянку в походе Previous guide: How to Build an Overnight Shelter on a Hike
You can view the full list here: Camping Life: Tips, Guides, Lifehacks












